Fibaro Dimmer 2


This wireless dimmer switch lets you dim, brighten, and turn your hard-wired lights on and off from your smartphone—wherever you are. The dimmer switch is fitted behind your light switch and connects to your existing wiring. It also reports on energy usage.

Trigger your light fixtures to turn on or off when other events take place, such as when a door opens or someone arrives or leaves a room or the house.

With a Dimmer 2 you can :

  • Use your smartphone to dim, brighten, or turn your lights on and off.
  • Schedule your lights to dim, brighten, or turn on or off at set times each day.
  • Trigger lights to dim or brighten when different things happen—such as when door opens or movement is detected or specific people arrive
  • Continue to control your smart lights manually.
  • Pair this switch with up a motion sensor and get it to gently illuminate your path to a bathroom or kitchen at night.
  • View the energy consumption of your home in clear charts and graphs, and use it to reduce your monthly bill.

Out of stock

Category: .

Product Description

  • Designed to operate with or without neutral lead. It may be used as a switch in systems without neutral lead.
  • Implemented algorithm of smart light source detection
  • Auto-adjustment of the appropriate control mode to connected load
  • Active power and energy metering functionality
  • Memory of the last lighting level settings
  • Works with various types of switches – momentary, toggle, three-way, etc.
  • To be installed in wall switch boxes of dimensions allowing for installation
  • As the Dimmer it operates under the following loads:
    – Conventional incandescent
    – Halogen 230V
    – Low voltage halogen 12V (with electronic transformers)
    – Dimmable LED
  • As an electronic switch it may work with:
    – Compact fluorescent lamps
    – LED bulbs
    – Fluorescent lamps with electronic stabilisers
  • For loads other than resistive do not exceed 1.5A current
  • Easy installation through video tutorial

Technical Specs

Power supply: 110-240V ±10% 50/60Hz
Power consumption: < 0,8W
Operational temperature: 10 - 40 °C
Dimensions (L x W x H): 42 x 37 x 17 mm
For installation in boxes: Ø ≥ 50mm
Output Power 25-500 W (for resistive loads - 230V) 10-250W (for resistive loads - 110V)
Circuit temperature limits 105°C
Overcurrent protection: 2.5 A
Active element: semiconductor electronic switch ε
Device control: remotely - radio waves directly - external switch
Radio protocol: Z-Wave
Radio signal power: up to 1mW
Radio frequency: 868.4, 869.85 MHz EU
Range: up to 50 m outdoors up to 30 m indoors (depending on building materials)
Comply with EU directives: RoHS 2011/65/EU LVD 2006/95/EC EMC 2004/108/EC R&TTE 1999/5/EC

You may also like…

Start typing and press Enter to search

Fibaro Relay Switch (2x1.5Kw) Left