Fibaro Double Relay


The relay can be used to switch power sockets and devices connected to them such as table lamps, TVs and other appliances on and off, either at will, a specific schedule or in response to a sensor input. The relay is fitted by connecting it to your existing wiring and placed inside the electrical outlet box itself. It can support one or two power sockets.

With a relay you can:

  • Control lamps or appliances that are plugged into the outlet with your smartphone
  • Trigger the object connected to turn on or off when other events take place; such as a door opening or someone arriving or leaving a room or house
  • Restrict kids access to TVs or games consoles to specific times of the day
  • Save energy by connecting it to your water heaters and having them come on in time for your morning shower

Out of stock

Category: .

Product Description

  • Controls two loads up to 1.5KW (6.5A) each
  • Enables Z-Wave control of two independent lights or appliances
  • 6.5A per channel and 10A total load
  • Very small size enables modules to fit into standard switch boxes (45mm recommended)
  • DIY installation
  • Placed in an electrical socket box behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the relay that is controlling the load

Technical Specs

Power supply 110 - 230V± 10% 50 - 60Hz, 24-60DC ±10%
Maximum load current for single AC output 8A/230V 50/60Hz
Maximum load current for single DC output 8A / 30V
Output circuit power (resistive load-230V) 2 x 1.5 kW
Comply with EU standards EN 55015 EN 60669-2-1
Circuit temperature limits 105 °C
Operational temperature 0 - 40 °C
For installation in boxes Ø ≥ 50mm
Radio signal power 1mW
Radio protocol Z-Wave
Radio Frequency 868,4 MHz EU
Range up to 50 m outdoors up to 30 m indoors (depending on building materials)
Dimensions (L x W x H) 42 x 37 x 17 mm
Electricity consumption < 0,8W

You may also like…

Start typing and press Enter to search

Dimmer 2 RightFibaro_Door_Window_Contact